GPS-Base Manual

1 Introduction
1.1 General
1.2 Scope of Delivery

2 Comissioning the GPS-Base
2.1 Mounting the tripod and antennas
2.2 Powering up
2.3 Status information
2.4 Operation via keypad
2.5 Determining the position
2.6 Stationary operating mode
2.7 Storing and retrieving position data
2.8 IP-Settings
2.9 Serial port baudrate

3 Correction data
3.1 Correction data formats and the relating logs

4 Raw data logging
4.1 Preparing the GPS-Base station
4.2 Data logging
4.3 Convert raw to observer data

5 Battery
5.1 Internal Battery
5.2 Battery Replacement

6 Service interface
6.1 Firmware update of the GPS-Base
6.2 Firmware update of the GNSS-Receiver

7 Storing