
Power LED (PWR)
![]() | Off No power. |
![]() | Solid green Device has power but is not connected to the internet. |
![]() ![]() | Flashing green / cyan Device has power and is in the process of connecting to the internet.ㅤㅤ |
![]() | Solid cyan Device has power and is connected to the internet.ㅤㅤ |
SIM LED
Indicates the SIM card status.
![]() | Off No SIM is present |
![]() | Solid green SIM1 is active. |
![]() | Solid blue SIM2 is active |
![]() | Solid red SIM failure.ㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤ |
LTE
Indicates the status of the cellular module and the ETH interface connection.
![]() | Solid yellow Initializing on startup. |
![]() ![]() | Flashing yellow In the process of connecting to the cellular network and to a device on its ETH port. |
![]() ![]() | Flashing green Connected to 2G or 3G and is in the process of connecting to any device on its ETH port, or nothing is connected to the port. |
![]() ![]() | Flashing blue Connected to 4G LTE and is in the process of connecting to device on its ETH port. |
![]() ![]() | Flashing white ETH port connection etablished and in the process of connecting to the cellular network. |
![]() | Solid green Connected to 2G or 3G and having device linked to ETH port. |
![]() | Solid blue Connected to the 4G LTE and having device linked to ETH port. |
![]() ![]() | Alternating red/yellow Upgrading firmware. |
Note:
Do not power off the system during firmware update!
Signal quality indicators
LED 1 to 5 indicate the cellular service quality level.
Signal bars | Weighted dBm | Signal strength % | Quality |
---|---|---|---|
![]() | -113 to -99 | 0% to 23% | Bad |
![]() ![]() | -98 to -87 | 24% to 42% | Marginal |
![]() ![]() ![]() | -86 to -76 | 43% to 61% | OK |
![]() ![]() ![]() ![]() | -75 to -64 | 62% to 80% | Good |
![]() ![]() ![]() ![]() ![]() | -63 to -51 | 81% to 100% | Excellent |
Note:
The weighted dBm measurements are negative numbers, meaning values closer to zero denote a larger number. For example, -85 dBm is a better signal quality than -90 dBm.
Ethernet Link and Activity
The ETH port’s LEDs indicate both network interface activity and interface uptime.

Right LED
⚪ | Off No Ethernet link detected. |
🟢 | Solid green Ethernet link detected. |
🟢⚪ | Blinking green Indicates Ethernet traffic. |
Left LED
⚪ | Off No Ethernet link detected. |
🟡 | Solid yellow 10/100 Mbps link detected. |