ADMA-G#
| PORT | LED | DESCRIPTION |
|---|---|---|
| 9-32 V DC IN | ⚪ OFF ⚪ OFF | No supply voltage |
| 9-32 V DC IN | 🟢 ON ⚪ OFF | Supply voltage connected ADMA boot process started |
| 9-32 V DC IN | 🟢 ON 🟢 ON | Ready for operation |
| Modem | 🟢 ON | Modem port activated |
| Baro | 🟢 ON | Baro activated (No longer supported) |
| CAN 1-5 | 🟢  | Data output via CAN |
| Ethernet 1-3 | 🟢 🟢 | Data Link |
| COM | 🟢 🟢 | Data output via COM |
ADMA-Speed#
| PORT | LED | DESCRIPTION |
|---|---|---|
| 9-32 V DC IN | ⚪ OFF ⚪ OFF | No supply voltage |
| 9-32 V DC IN | 🟢 ON ⚪ OFF | Supply voltage connected ADMA boot process started |
| 9-32 V DC IN | 🟢 ON 🟢 ON | Ready for operation |
| State | 🟢 ON | Ready for operation |
| Modem | 🟢 ON | Modem port activated |
| CAN 1 | 🟢 | Data output via CAN |
| Ethernet 1-3 | 🟢 🟢 | Data Link |
| IMU | 🟢 ON | IMU connected |
| Signal | 🟢 ON | + 5V DC and +12V DC power at signal out port active |
ADMA-Slim#
| PORT | LED | DESCRIPTION |
|---|---|---|
| 9-32 V DC IN | ⚪ OFF 🟢 ON | No supply voltage Supply voltage connected |
| Core status | ⚪ OFF 🟢 ON 🔴 ON | No supply voltage Ready for operation booting |
| COM | 🟢 | Data output via COM |
| CAN 1 | 🟢 | Data output via CAN |
| Ethernet Data | ⚪ OFF 🟢 | No data output via ETH Data output via ETH |
| Ethernet Link | ⚪ OFF 🟢 ON | No Link (Network disconnected) Link |
| GNSS Status | 🟢 🔴 ON | GNSS OK GNSS Error |
