Technical Support Center

IPS Frontview and Interfaces


Connectors

Beacons and Rovers got different interfaces.

LED indicators

Beacon

LED COLORSTATUS DESCRIPTION
The beacon is in bootloader mode.
The beacon is connected via Bluetooth.
The beacon has been used for ranging within the last second and is synchronized.
The beacon is idle.
There is a not recoverable fault (such as an invalid reply to a radio ID request).
The beacon does not have a site configuration.

Rover

LED COLORSTATUS DESCRIPTION
The rover is in bootloader mode.
The rover is connected via Bluetooth.
The rover is in ‘Stand alone mode’ and receives ranging data from at least 3 beacons.
The rover is looking for beacons. / The rover is reading the site information. / The rover is set to beacon mode.
The rover cannot see at least 3 beacons.
The rover is syncing the IMU.
The rover is waiting for ADMA communication.
There is a not recoverable fault (such as an invalid reply to a radio ID request)
Applikationsingenieur | bei GeneSys seit 2014

Notify me about Updates