Connectors
Beacons and Rovers got different interfaces.
![]() | ![]() |
LED indicators
Beacon
LED COLOR | STATUS DESCRIPTION |
---|---|
![]() | The beacon is in bootloader mode. |
![]() ![]() ![]() | The beacon is connected via Bluetooth. |
![]() | The beacon has been used for ranging within the last second and is synchronized. |
![]() ![]() ![]() | The beacon is idle. |
![]() | There is a not recoverable fault (such as an invalid reply to a radio ID request). |
![]() ![]() ![]() | The beacon does not have a site configuration. |
Rover
LED COLOR | STATUS DESCRIPTION |
---|---|
![]() | The rover is in bootloader mode. |
![]() | The rover is connected via Bluetooth. |
![]() | The rover is in ‘Stand alone mode’ and receives ranging data from at least 3 beacons. |
![]() | The rover is looking for beacons. / The rover is reading the site information. / The rover is set to beacon mode. |
![]() ![]() ![]() | The rover cannot see at least 3 beacons. |
![]() ![]() ![]() | The rover is syncing the IMU. |
![]() | The rover is waiting for ADMA communication. |
![]() | There is a not recoverable fault (such as an invalid reply to a radio ID request) |