Account / Downloads

Tobias Wagner

Applikationsingenieur | bei GeneSys seit 2014
linkedin
Technical Support CenterPosts by Tobias Wagner

LED Indicators: ADMA-Slim

ADMA-Slim PORTLEDDESCRIPTION9-32 V DC IN⚪ OFF🟢 ONNo supply voltageSupply voltage connected ...

Mounting auxiliary antennas

The antennas for the ADMA, GNSS, Radio Modem or GPRS-Modem and Wireless LAN should be spaced out across the...

NTRIP-DGNSS-Box 5 – LED Indicators

Power LED (PWR) OffNo power.Solid greenDevice has power but is not connected to the internet.Flashing green / cyanDevice has power...

NTRIP-DGNSS-Box 5 – Setup as ADMA Modem

When using the NTRP-DGNSS-Box 5 as correction data modem for the ADMA, the NTRIP Box Serial interface has to...

Single and Dual Antenna

All models of the ADMA family can be ordered as single or dual GNSS antenna version. Single GNSS antenna version For...

External velocity measuring system mounting

Usually, the external speed measuring system is attached to one side of the vehicle. For slalom tests involving a...

TCP/IP Settings for connecting to the ADMA Webinterface

The Webinterface is integrated in the ADMA. For access, the following settings of the network connection must be done: 1...

ADMA Webinterface

The ADMA provides options for certain user-specific and operational settings / configurations. On application of the supply voltage, the...

System and GNSS-Receiver information

To get system information open the menu SYSTEM. It delivers detailed information about the following system data: ADMA Information PropertyDescriptionAliasUserdefined name...

Functionality of the ADMA Standstill detection

The following describes standstill detection thresholds and their correct entry, which will increase the data integrity. Standstill allows a...

Determine Standstill detection parameters

Automatic determination of the max rate threshold The threshold values for maximum rate at standstill can be determined automatically using...

Modify threshold for AutoInit and Heading Control

The AutoInit function of the ADMA is used to automatically set the ADMA inertial states after system start-up, including...

GeneSys Elektronik GmbH
Maria-und-Georg-Dietrich-Str. 6
77652 Offenburg, Germany
+49 (0) 781 969279 0

Fax: +49 (0) 781 969279 11

Immer auf dem neuesten Stand!
Abonnieren Sie unseren Newsletter und erhalten Sie die wichtigsten Neuigkeiten direkt in Ihr Postfach.

Copyright 2025 - GeneSys Elektronik GmbH