Account / Downloads

Tobias Wagner

Applikationsingenieur | bei GeneSys seit 2014
linkedin
Technical Support CenterPosts by Tobias Wagner

Reset GNSS-Receiver to a previous authorization code

Needed tools • Computer with a serial interface or a USB to RS232 adapter• ADMA Power cable• ADMA Ethernet cable•...

GPS-Base Introduction

This user manual is meant to assist commissioning of the GNSS Base Station. Real-Time Kinematic (RTK) operation provides centimeter-level...

GPS-Base Scope of Delivery

The GNSS Base Station is completely supplied including basic cables, GNSS antenna and documentation. Other components are available; please...

Commissioning the GPS Base Station

The GNSS Base Station is quite easy to handle. The commissioning procedure is summarized in the steps described below. •...

GPS Base Firmware Update

The components listed next are needed to download the firmware.• PC with serial interface• Programming cable GPS-BASE-CABLE-GPS-FIRMW-2M (white Lemo)•...

GNSS Receiver Update of the GPS Base

The presets mentioned below must be set for accessing the internal GNSS receiver via the service interface.• PC with...

Internal battery

The GNSS Base Station is delivered with an internal battery pack, which is capable of running up to 10...

Battery Replacement

At the following section you will find instructions on how to replace the internal batteries of the GNSS BASE...

GPS Base Technical Data

Storing To prevent battery damages please note the following steps before putting the GNSS Base Station in storage.• The internal...

IPS Introduction

This user manual serves as an aid in commissioning the IPS (Indoor Positioning System). The GeneSys IPS uses a network...

IPS Scope of delivery

DESCRIPTIONIPSIPS Rover🔵IPS Rover serial config cable 2 m (RLCAB151)🔵X IPS Beacons🔵X Beacon Power Cables 3 m (RLAB152)🔵X Tripods incl....

IPS Frontview and Interfaces

Connectors Beacons and Rovers got different interfaces. LED indicators Beacon LED COLORSTATUS DESCRIPTIONThe beacon is in bootloader mode.The beacon is connected via Bluetooth.The...

GeneSys Elektronik GmbH
Maria-und-Georg-Dietrich-Str. 6
77652 Offenburg, Germany
+49 (0) 781 969279 0

Fax: +49 (0) 781 969279 11

Immer auf dem neuesten Stand!
Abonnieren Sie unseren Newsletter und erhalten Sie die wichtigsten Neuigkeiten direkt in Ihr Postfach.

Copyright 2025 - GeneSys Elektronik GmbH