Tobias Wagner

Applikationsingenieur | bei GeneSys seit 2014
linkedin
Technical Support Center按职位 Tobias Wagner

ADMA Coordinate Systems

Applicable to the coordinate systems used in ADMA (except for the positions):• They are right-handed Cartesian coordinate systems• Direction...

Measurement process sequence

After powering up, the system runs through a boot process which ends in standby mode. The ADMA's measuring mode...

Start ADMA measurement

Basically, there are 4 possibilities to start a measurement:• Webinterface menu 6️⃣ LOAD/SAVE/START command Start measurement.• the main menu’s...

Kalman Filter Initialization Procedure

In this article, we will delve into the various initialization phases of the ADMA, as depicted in the flow...

Braking Tests – Add-On Braking

The Add-On Braking is an additional functionality of the ADMA for measuring distances at braking tests. The Add-On allows...

Add-On – Delta 1:1 (Legacy)

The DELTA Data is an additional functionality (Add-On) of the ADMA. There are two ADMA’s needed:• one in the...

Filter – Add-On

Introduction This Add-On allows to filter ADMA acceleration and angular rates before output on the Ethernet or CAN interface with...

ADMA – Firmware and License Update

GeneSys Elektronik GmbH continuously releases free firmware updates for the ADMA.These firmware updates include enhancements to existing features and...

GNSS-Receiver – Firmware Update (OEM 6) [Legacy]

In addition to the ADMA firmware, the GNSS receiver firmware should also be kept up to date. To update...

Reset GNSS-Receiver to a previous authorization code

Needed tools • Computer with a serial interface or a USB to RS232 adapter• ADMA Power cable• ADMA Ethernet cable•...

GPS-Base Introduction

This user manual is meant to assist commissioning of the GNSS Base Station. Real-Time Kinematic (RTK) operation provides centimeter-level...

GPS-Base Scope of Delivery

The GNSS Base Station is completely supplied including basic cables, GNSS antenna and documentation. Other components are available; please...