Technical Support Center

SensorX Manual

Updated on September 28, 2026

1 SensorX Introduction

2 Scope of Delivery

3 Interfaces

4 LED Indicators

5 Configuration of SensorX
5.1 Connecting to the SensorX
5.2 GUI Walkthrough

6 Test Setup at your Table

7 Installation and Cabeling inside the Vehicle

8 Measurement Data

9 License Management

10 Firmware Update

Note: For a practical quick walkthrough of setting up the SensorX refer to the Quickstart Guide.

Tobias Wagner

Applikationsingenieur | bei GeneSys seit 2014

Not the solution you are looking for?

Please check other articles or open a support ticket.

Was this article helpful to you?